Tel:0086-13983479340
E-mail:sales@cqorek.com
  • Home
  • Products

    CXJ centrifugal oil filter

    ZYS on load switch online oil filter

    LUC portable oil filter

    ZYM trailer type insulated oil filter

    NKVW vacuum unit

    BZ insulation oil regeneration equipment

    IIJ-II Insulation Oil Voltage Withstand Tester

    NKEE Micro Water Detector for Insulating Oil

    JYWL Horizontal Enclosed Filter

    Vacuum oil filter accessories

    More Products

  • Technical Support
  • Cases
  • News
  • About

    About Us

    Corporate Culture

    Honor

  • Contact Us
  • How to use clay to treat oil color

    Time:2026-06-17 Views:0 Author:OREK

    1780296231114728

    Activated clay is mainly white and pink, odorless, non-toxic, with good activity and strong adsorption. It is easy to absorb moisture in the air. If left for too long or exposed to moisture, its adsorption function will be reduced. It is recommended to heat it (at 80-100 degrees Celsius) to revive it. If heated above 300 degrees Celsius, it will lose its crystalline water and its structure will change, affecting the decolorization effect. Choose strong adsorption capacity, high decolorization rate, low oil carrying rate, fast filtration speed, and low addition amount. Effectively removing total phospholipids, soaps, and trace metal ions from oils and fats, it is a natural antioxidant. Remove toxins and odor substances such as aflatoxin and pesticide residues from oils and fats. The acid value of the decolorized oil does not increase, it does not discolor, is clear and transparent, has stable quality, and has a long shelf life. Specially suitable for the refined production of mineral oil, vegetable oil, and animal oil. Dosage ratio: The dosage is determined based on the depth of the color. For black colors, a 1:10 ratio is used (1 jin of clay is used to treat 10 jin of oil). For darker colors, a ratio of 1:20, 1:30, or 1:50 is used. The specific dosage depends on the degree of decolorization desired. Usage: Add activated clay, stir evenly for 20 minutes, let it settle for more than 3 days, and finally filter out the clay with a filter mesh of 400 or more. Waste oil must be single, for example, the gear oil used cannot be mixed with diesel and other oil products. If other oil products are mixed together, the sediment will not meet the requirements for reuse, so only a distillation kettle can be used for purification. If no other oil products are added, after adding clay sediment to the container, such as an oil tank, a filter can be used to filter out most of the clay, and then an oil filter can be used to filter and refine it again. Only in this way can the obtained oil be clear and can continue to be used.

  • 产品展示

    ZY单级真空绝缘油滤油机
    ZYD双级真空变压器油滤油机
    ZJA特高压绝缘油滤油机
    TYC液压油滤油机
    TY透平油真空滤油机
    TYA润滑油聚结真空滤油机
  • 关于我们

    公司介绍
    公司文化
    资质荣誉
  • 新闻资讯

    公司介绍
    公司文化
  • 技术支持

    技术支持
  • 工程案例

    工程案例
  • 联系我们

    电话:023-6138-3760
    手机:139-8347-9340
    传真:023-6138-3760
    邮箱:sales@nkoilpurifier.com
    地址:重庆市珞璜工业园B区

    关注我们

    友情链接:滤油机厂家 滤油机厂家
    Copyright © 2018-2026 重庆诺庆机电有限公司 All Rights Reserved.
    网站地图